Week |
Tuesday Lecture |
Thursday Lecture |
|
Section and Other Activities |
Week 1
1/4 - 1/8 |
Course Overview
(J & G)
|
Dynamics and Equivalent Inertia
(G)
Motor Parameter ID
(J)
Due at Beginning of Lecture:
Pre-Quiz at Home
Reading Before Class:
Motor Primer
|
|
Section: Electronics & Sensors Intro
Meet in EBU2-311
------------
ODE Workshop
Time and Location
1/7/16 6-8pm EBU2 Rm239 |
Week 2
1/11 - 1/15
|
Electronics for MEs
(G)
Reading Before Class:
Electronics for MEs |
Encoders, Potentiometer, and Data Interpretation
(J)
Due at Beginning of Lecture:
HW
|
|
Due Before Section:
Install Arduino Software and Run Blink Code
Meet in EBU2-311
------------
C Basics Workshop
Time and Location
1/14/16 6-8 pm EBU2 Rm239
|
Week 3
1/18 - 1/22 |
Data Interpretation and Motor Characterization (J)
Due by Tuesday 7pm:
Hardware Setup Assignment |
Data Interpretation and Motor Characterization (continued) (J)
Mechatronics Systems, Timing Belts, and Friction
(G)
Due at beginning of Lecture:
HW 2 Part A
|
|
Section: PID Control
Meet in EBU2-311
|
Week 4
1/25 - 1/29
|
Closed Loop Control
(J)
Due at beginning of Lecture:
HW 2 Part B |
Control Part II
(J)
|
|
Section: Machine Shop
Meet in EBU2-B31
|
Week 5
2/1 - 2/5
|
IntroduceMechatronics
Optimization Challenges
(G+J)
Optimization Methods (G)
Due at beginning of Lecture:
HW 3
|
Optimization Methods Continued
(G)
Mid - Term Review
|
|
Section: Machine Shop
Meet in EBU2-B31
|
Week 6
2/8 - 2/12
|
MID-TERM EXAM
|
Announce Sponsored Projects
Project Preference Form due 2/14
(J & G)
|
|
Section: Machine Shop
Meet in EBU2-B31
|
Week 7
2/15 - 2/19
|
Open Loop Challenge Demo Day
(J + G)
Due at beginning of lecture:
Open Loop Challenge Report
Announce Sponsored Project Teams
|
Engineering Staff Support
(G)
|
|
Section: Machine Shop
Meet in EBU2-B31
-----------
Set Meeting with Sponsor
|
Week 8
2/22 - 2/26
|
Succeeding in Real-World Projects
(G) |
Bearing Analysis
3:30pm-3:50pm
then
Problem Definition Meetings |
|
Section: Machine Shop
Meet in EBU2-B31
---------------
Kickoff Meeting with Sponsor
|
Week 9
3/1 - 3/5
|
Closed Loop Challenge Demo Day
Meet in EBUII 311
(J + G)
Due at beginning of lecture:
Closed Loop Challenge Report
|
Fasteners
3:30pm-3:50pm
then
Problem Definition Meetings
|
|
Machine Shop
Meet in EBU2-B31
------------
Set Up Project Workspace
|
Week 10
3/8 - 3/12
|
FBD Quiz
3:30pm-3:50pm
then
Team Meetings with Instructor
|
Fatigue Lecture
CES Material Selection Software
3:30pm-3:50pm
then
Team Meetings with Instructor
|
|
Risk Reduction Tests
|
Finals
Week
|
Tuesday 3/15 3pm-6pm
Risk Reduction Presentations
In Class Presentation Feedback:
EBUII
Center Hall
Documentation and Logistics
Sponsored Team Peer Review
(due Wednesday 3/16 at Noon)
|
|
|
|