Announcements

Peer Review is Due Tuesday 3/18 Midnight

posted Mar 14, 2014, 3:22 PM by Nate Delson   [ updated Mar 16, 2014, 10:31 AM by Jerry Tustaniwskyj ]

For the sponsored project, a component of the grade is based upon a peer review by your teammates. Completed the Peer Review is a required assignment, which must be done by Tuesday 3/18 midnight. Follow instructions at link below:

CES Material Selection Software

posted Mar 14, 2014, 5:37 AM by Nate Delson

The material on the CES Material Selection Software is posted on the schedule and provides assignments for those that are using this for their Individual Component Analysis.

Fastener Assignment

posted Mar 10, 2014, 7:11 AM by Nate Delson   [ updated Mar 12, 2014, 3:18 PM ]

A legible version of the Fastener Assignment has been posted. It is due 3/13 at beginning of lecture.

There is only 1 fastener problem in the assignment.

TA Contact info for MAE156B

posted Mar 4, 2014, 3:24 PM by Nate Delson

Teams 1-8 will be in section A00 with support from TA, Pedro Franco, pedrofranconavarro@gmail.com

Teams 9-16 will be in section B00 with support from TA,  Patrick McGuire, pmcguire@eng.ucsd.edu

Sponsored Project Numbers

posted Mar 3, 2014, 6:24 AM by Nate Delson   [ updated Mar 3, 2014, 6:24 AM ]

Selected Sponsored Projects and thier nubmers are listed on the MAE156B Spring 2014 webpage

DS Access, returning kits, and much more!

posted Feb 28, 2014, 12:08 AM by Trevor Scheck   [ updated Feb 28, 2014, 3:15 PM ]

Congratulations to everyone on building some pretty awesome robots!

Robot Reports:
As you should be aware, the Robot Reports are due by 8pm Friday (today). Please deposit them on time in the clear plastic storage bin with the red lid located in Room 311.
I will be available to answer questions and record last minute times for robots that have not yet completed a timed trial yet. I will likely be in EBU-II 328 (across from 339 where many of you have seen me before) until 8pm. I also have the graded Midterms ready for pickup.

Loss of Design Studio access:
In order to begin preparing for MAE 3 and a special event at the end of the quarter, students will no longer have access to the Design Studio after next Tuesday (March 4). If you were stationed in the Room 315 (the workbench area of the Design Studio), please move your robot and storage bin to room 311 or 339. Do not take it home. Those students who had door codes for the Design Studio will lose access after Tuesday.

Returning Robot Kit Parts:
On Wednesday, there will be a time for you to come by 311 and return Robot Kit parts.
You will need to return ALL items bought from the TA store, ALL of the electrical components, ALL tools that came in your kit, and any leftover raw materials. The schedule for Wednesday hours will be posted soon. You can also pick up your graded homework assignments and midterm at that time as well.

TA Office hours:
The TA's will shift to having office hours by appointment, therefore please email TA's if you would like to ask them questions or setup a time to meet.


-Trevor

Robot Presentations 3-Minutes

posted Feb 24, 2014, 3:58 PM by Nate Delson

Please review the guidelines for the 3-Minute Robot Presentations, which take place Thursday 2/27.

The username and password to upload your files was sent via email.

Sunday (2/23) Design Studio Hours

posted Feb 22, 2014, 3:56 PM by Patrick McGuire

As announced in class, the Design Studio Fabrication Shop and LaserCAMM will be open Sunday (2/23) from 11am - 5pm.

Robot times have been posted on the website on the Robot Teams link on the left navigation panel under "Course Overview."

Design Studio Open Mon. Feb. 17th

posted Feb 14, 2014, 10:43 PM by Trevor Scheck

The Design Studio will be open from 5pm-8pm on Monday, February 17th.

That day is a University Holiday (Presidents Day), however Daniel Yang will hold additional office hours to allow teams extra time to work on their robots.

Sponsored Projects Info

posted Feb 11, 2014, 4:34 PM by Nate Delson   [ updated Feb 15, 2014, 6:17 AM ]


To MAE156A Students,

The Project Preference Form is due by Sunday 2/16/2014 midnight

All the projects presented in class today are available at the website below. You will need the username and password sent to you via email.


Please read these projects carefully and discus with classmates you want to work with. All project preference forms are due Sunday 2/16 midnight.

Thank you,

Delson and Tustaniwskyj

1-10 of 24